Recovery
Anderson, M. P. (1988). Simulation of grain growth in two and three dimensions. Roskilde, Denmark, Risø National Laboratory.
Bons, P. D. and M. W. Jessell (1999). "Micro-shear zones in experimentally deformed octachloropropane." Journal of Structural Geology 21(3): 323-334.
Buggisch, W., G. Kleinschmidt, M. R. A. e. Thomson, J. A. e. Crame and J. W. e. Thomson (1991). "Recovery and recrystallization of quartz and "crystallinity" of illite in the Bowers and Robertson Bay terranes, northern Victoria Land, Antarctica." Fifth international symposium on Antarctic earth sciences 5: 155-159.
Covey-Crump, S. J. (1997). "The high temperature static recovery and recrystallization behaviour of cold-worked Carrara marble." Journal of Structural Geology 19(2): 225-241.
Covey-Crump, S. J. (1998). "Evolution of mechanical state in Carrara marble during deformation at 400[deg]to 700[deg]C." Journal of Geophysical Research B: Solid Earth 103(12): 29,781-29,794.
Dell'Angelo, L. and J. Tullis (1996). "Textural and mechanical evolution with progressive strain in experimentally deformed aplite." Tectonophysics 256(1-4): 57-82.
Dell'Angelo, L. N. and J. Tullis (1996). "Textural and mechanical evolution with progressive strain in experimentally deformed aplite." Tectonophysics 256(1-4): 57-82.
Feng, C., L. E. Murr and C.-S. Niou (1996). "Aspects of dynamic recrystallization in shaped charge and explosively formed projectile devices." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(7): 1773-1778.
Frost, H. J., J. Whang and C. V. Thompson (1988). Modelling of grain growth in thin films. Annealing Processes - Recovery, Recrystallization and Grain Growth, Risø National Laboratory, Roskilde, Denmark, Risø National Laboratory.
Hickman, S. H. and B. Evans (1992). Growth of grain contacts in halite by solution-transfer; implications for diagenesis, lithification, and strength recovery. Fault mechanics and transport properties of rocks; a festschrift in honor of W. F. Brace. B. e. Evans and T.-f. e. Wong: 253-280.
Hirth, G. and J. Tullis (1992). "Dislocation creep regimes in quartz aggregates." Journal of Structural Geology 14(2): 145-159.
Kuramoto, S., G. Itoh and M. Kanno (1996). "Intergranular fracture in some precipitation-hardened aluminum alloys at low temperatures." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(10): 3081-3088.
McNelley, T. R. and M. E. McMahon (1996). "Investigation by interactive electron backscatter pattern analysis of processing and superplasticity in an aluminum-magnesium alloy." Symposium in In Situ Reactions for Synthesis of Composites, Ceramics, and Intermetallics; Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(8): 2253-2262.
Meyers, M. A., G. Subhash, B. K. Kad and L. Prasad (1994). "Evolution of microstructure and shear -band formation in [ALPHA;]-hcp titanium." Mechanics of Materials 17(2-3): 175-193.
Montagnat, M. and P. Duval (2000). "Rate controlling processes in the creep of polar ice, influence of grain boundary migration associated with recrystallization." Earth and Planetary Science Letters 183(1-2): 179-186.
Post, A. and J. Tullis (1998). "The rate of water penetration in experimentally deformed quartzite: implications for hydrolytic weakening." Tectonophysics 295(1-2): 117-137.
Randle, V., B. Ralph and N. Hansen (1988). Grain growth in crystalline materials. Annealing Processes - Recovery, Recrystallization and Grain Growth, Risø National Laboratory, Roskilde, Denmark, Risø National Laboratory.
Ree, J.-H. and Y. Park (1997). "Static recovery and recrystallization microstructures in sheared octachloropropane." Journal of Structural Geology 19(12): 1521-1526.
Ree, J. H., Y. Park, W. Means and Anonymous (1996). "Post-deformational recovery and recrystallization microstructures in the quartz analog (?) octachloropropane
Geological Society of America, 28th annual meeting." Geological Society of America, 28th annual meeting 28(7): 189.
Ren, B. and J. G. Morris (1995). "Microstructure and texture evolution of Al during hot and cold rolling." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(1): 31-40.
Ross, J. V. and K. R. Wilks (1995). "Effects of a third phase on the mechanical and microstructural evolution of a granulite." Tectonophysics 241(3-4): 303-315.
Royal, T. E., S. Namjoshi and N. N. Thadhani (1996). "Mechanistic processes influencing shock chemistry in powder mixtures of the Ti-Si, Ti-Al, and Ti-B systems." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(7): 1761-1771.
Rutter, E. H. (1998). "Use of extension testing to investigate the influence of finite strain on the rheological behaviour of marble." Journal of Structural Geology 20(2-3): 243-254.
Rutter, E. H. (1999). "On the relationship between the formation of shear zones and the form of the flow law for rocks undergoing dynamic recrystallization." Tectonophysics 303(1-4): 147-158.
Sakai, T. and J. J. Jonas (1988). A grain refinement/grain coarsening model for dynamic recrystallization. Annealing Processes - Recovery, Recrystallization and Grain Growth, Risø National Laboratory, Roskilde, Denmark, Risø National Laboratory.
Takei, Y. (2001). "Stress-induced anisotropy of partially molten media inferredfrom experimental deformation of a simple binary system und er acoustic monitoring." Journal of Geophysical Research B: Solid Earth 106(1): 567-588.
Telley, H., T. M. Liebling and A. Mocellin (1988). Simulation of grain growth in 2-dimensions: influence of the energy expression for the grain boundary network. Annealing Processes - Recovery, Recrystallization and Grain Growth, Risø National Laboratory, Roskilde, Denmark, Risø National Laboratory.
Voegele, V., J. I. Ando, P. Cordier and R. C. Liebermann (1998). "Plastic deformation of silicate garnets I. High-pressure experiments." Physics of The Earth and Planetary Interiors 108(4): 305-318.
Voegele, V., P. Cordier, V. Sautter, T. G. Sharp, J. M. Lardeaux and F. O. Marques (1998). "Plastic deformation of silicate garnets II. Deformation microstructures in natural samples." Physics of The Earth and Planetary Interiors 108(4): 319-338.
Wang, G.-X., B. Dogan, F.-Y. Hsu, H.-J. Klaar and M. Dahms (1995). "Microstructure and high-temperature tensile deformation of TiAl(Si) alloys made from elemental powders." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(3): 691-701.
Zauter, R., H.-J. Christ and H. Mughrabi (1994). "Some aspects of thermomechanical fatigue of AISI 304L stainless steel: part II. Dislocation arrangements." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 25A(2): 407-413.