Sim/Mod
Amenta, R. V. (2001). "Three-dimensional computer modeling of fabric evolution in igneous rocks." Computers and Geosciences 27: 477–483.
Anand, L. and S. R. Kalidindi (1994). "Process of shear band formation in plane strain compression of fcc metals: effects of crystallographic texture." Mechanics of Materials 17(2-3): 223-243.
Anderson, M. P. (1988). Simulation of grain growth in two and three dimensions. Roskilde, Denmark, Risø National Laboratory.
Anderson, M. P., D. J. Srolovitz, G. S. Grest and P. S. Sahni (1984). "Computer simulation of grain growth - I. Kinetics." Act. Metall. 32(5): 783-791.
Bartholomeusz, M. F. and J. A. Wert (1994). "Effect of thermal exposure on microstructural stability and creep resistance of a two-phase TiAl/Ti3Al lamellar alloy." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 25A(11): 2371-2381.
Bartholomeusz, M. F. and J. A. Wert (1994). "Modeling creep deformation of a two-phase TiAl/Ti3Al alloy with a lamellar microstructure." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 25A(10): 2161-2171.
Bartholomeusz, M. F. and J. A. Wert (1995). "Modeling the minimum creep rate of discontinuous lamellar-reinforced composites." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(12): 3257-3264.
Bjørnerud, M. G. and H. Zhang (1994). "Rotation of porphyroblasts in non-coaxial deformation: insights from computer simulations." J. metamorphic Geol. 12: 135-139.
Bjornerud, M. G., Zhang, Hubao (1994). "Rotation of porphyroblasts in non-coaxial deformation; insights from computer simulations." Journal of Metamorphic Geology 12: 135-139.
Bons, P. D. and S. J. D. Cox (1994). "Analogue experiments and numerical modelling on the relation between microgeometry and flow properties of polyphase materials." Mat. Sci. Eng. A175(1-2): 237-246.
Bons, P. D., Jessell, M.W., Evans, L. Barr, T.D. and Stüwe, K. (2000). Modelling of anisotropic grain growth in minerals. A Volume in Honor of Hans Ramberg. N. S. M. e. Hemin A. Koyi. 193: 45-49.
Bons, P. D. J., Mark W. (1997). "Experimental simulation of the formation of fibrous veins by localised dissolution-precipitation creep." 61(1): 53-63.
Casey, M. and P. Huggenberger (1985). "Numerical modelling of finite-amplitude similar folds developing under general deformation histories." J. Struct. Geol. 7(1): 103-114.
Ceppi, E. A. and O. B. Nasello (1984). "Computer simulation of bidimensional grain growth." Scr. Met. 18: 1221-1225.
Cloetingh, S. and Y. Y. Podlachikov (2000). "Perspectives on tectonic modeling." Tectonophysics 320: 169–173.
Cundall, P. A. (1990). " Numerical modelling of jointed and faulted rock." In. Proceedings of Int. Conf. on Mechanics of Jointed and Faulted Rock 11-18: 11-18.
Cundall, P. a. B., M., (1988). " A microcomputer program for modelling large-strain plasticity problems." In. Numerical Methods in Geomechanics (edited by Swobada C). Proc. 6th Int. Conf. on Numerical Methods in Geomechanics. Balkema, Rotterdam, 2101-2108.
Dieterich, J. H. (1979). " Modelling of rock friction: 1." Experimental results and constitutive equations. J. Geophys. Res. 84: 2161-2168.
Dutton, R. E., S. Shamasundar and S. L. Semiatin (1995). "Modeling the hot consolidation of ceramic and metal powders." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(8): 2041-2051.
Etchecopar, A. (1974). " Simulations par ordinateur dee la deformation progressive d'un aggregat polycristallin." Etude du developement des structures orientees par ecrasement et cisaillement. Unpublished these 3e Cycle Universite de Nantes: Universite de Nantes.
Fradkov, V. E., L. S. Shvindlerman and D. G. Udler (1985). "Computer simulation of grain growth in two dimensions." Scr. Met. 19: 1285-1290.
Frost, H. J., J. Whang and C. V. Thompson (1988). Modelling of grain growth in thin films. Annealing Processes - Recovery, Recrystallization and Grain Growth, Risø National Laboratory, Roskilde, Denmark, Risø National Laboratory.
Geiro, A. A., Jessell, M.W., Valenta, R.K., Jung, G. and Cull, J.P. (1993). " Geological and geophysical modelling in the classroom." Australian Educational Computing 8: 109-112.
Grest, G. S., D. J. Srolovitz and M. P. Anderson (1985). "Computer simulation of grain growth - IV. Anisotropic grain boundary energies." Act. Metall. 33(3): 509-520.
Guglielmo, G. (1994). "Interference between pluton expansion and coaxial tectonic deformation: three-dimensional computer model and field implications." Journal of Structural Geology 16(2): 237-252.
Handy, M. R., J. Braun, M. Brown, N. Kukowski, M. S. Paterson, S. M. Schmid, B. Stöckhert, K. Stüwe, A. B. Thompson and E. Wosnitza (2001). "Rheology and geodynamic modelling: the next step forward." International Journal of Earth Sciences in press.
Hilgers, C., Köhn, D., Bons, P.D. and Urai, J.L. (2001). "Development of crystal morphology during unitaxial growth in a progressively opening fracture: II. Numerical simulations of the evolution of antitaxial fibrous veins." Journal of Structural Geology.
Hobbs, B. E. a. O., A., (1989). " Numerical simulation of shear band formation in a frictional-dilational material." Ingenieur-Archiv 59: 209-220.
Janssen, C., E. Bankwitz, P. Bankwitz and G. Harnisch (1991). "Application of digital image analysis in modelling recrystallization processes." Journal of Structural Geology 13(7): 851-858.
Jessell, M. (2001). The numerical simulation of microstructures in geological materials. The First Joint International Conference on Recrystallization and Grain Growth, Aachen, Germany.
Jessell, M. and Anonymous (1987). A simulation of fabric development in dynamically recrystallizing aggregates
International conference on Deformation of crustal rocks, Geological Society of Australia, Sydney, N.S.W., Australia. 19: 88.
Jessell, M., P. Bons, L. Evans, T. Barr and K. Stuwe (2001). "Elle: the numerical simulation of metamorphic and deformation microstructures." Computers & Geosciences 27(1): 17-30.
Jessell, M. W. (1986). " A computer simulation of grain shape fabric and CPO development in a recrystallizing aggregate." Shear Criteria Meeting Imperial College: London.
Jessell, M. W. (1986). " Dynamic Grain Boundary Migration and Fabric Development." Observations Experiments and Simulations: Ph.D thesis, the State University of New York at Albany.
Jessell, M. W. (1986). Dynamic grain boundary migration and fabric development: observations, experiments and simulations, State University of New York at Albany.
Jessell, M. W. (1987). Simulation of fabric development in dynamically recrystallising rocks. The Application of Numerical Techniques in Earth sciences. BMR Record 1987/49.
Jessell, M. W. (1988). " A simulation of fabric development in recrystallizing aggregates- I: Description of the model." Journal of Structural Geology. 10 771-778.
Jessell, M. W. (1988). " A simulation of fabric development in recrystallizing aggregates- II: Example model runs." Journal of Structural Geology. 10 779-793.
Jessell, M. W. and G. S. Lister (1990). "A simulation of the temperature dependence of quartz fabrics." In: R.J. Knipe & E.H. Rutter (eds), Deformation Mechanisms, Rheology and Tectonics, Geological Society Special Publications, No. 54: 353-362.
Jessell, M. W. L., Gordon S. and Anonymous (1989). The role of temperature in determining crystallographic preferred orientations
Australasian tectonics, Geological Society of Australia, Sydney, N.S.W., Australia. 24: 79.
Jessell, M. W. M., W. D. (1986). Deformation and recrystallization microstructures in quartz; a new teaching simulation
Geological Society of America, 99th annual meeting, Geological Society of America (GSA), Boulder, CO, United States. 18: 646.
Jessell, M. W. V., Rick K. and Anonymous (1994). Integrated structural and geophysical modelling
Deformation processes in the Earth; from microcracks to mountain belts; field conference, Geological Society of Australia, Sydney, N.S.W., Australia. 36: 82.
Jiang, J.-Q. and P. S. Bate (1996). "Use of microstructural gradients in hot gas-pressure forming of Zn-Al sheet." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(10): 3250-3258.
Kenkmann, T. a. D., G. (1998). "Stress gradients around porphyroclasts: palaeopiezometric estimates and numerical modelling." Journal of Structural Geology 20: 163-173.
Kestens, L., J. J. Jonas, P. Van Houtte and E. Aernoudt (1996). "Orientation selective recrystallization of nonoriented electrical steels." Symposium in In Situ Reactions for Synthesis of Composites, Ceramics, and Intermetallics; Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(8): 2347-2358.
Koehn, D., Hilgers, C., Bons, P.D., Passchier, C.W. (2000). "Numerical simulation of fibre growth in antitaxial strain fringes." Journal of Structural Geology 22: 1311-1324.
Kunaver, U. and D. Kolar (1993). "Computer simulation of anisotropic grain growth in ceramics." Acta metall. mater. 41(8): 2255-2263.
Lebensohn, R. A., H.-R. Wenk and C. N. Tomé (1998). "Modelling deformation and recrystallization textures in calcite." Acta mater. 46(8): 2683-2693.
Leiss, B. and D. J. Barber (1999). "Mechanisms of dynamic recrystallization in naturally deformed dolomite inferred from EBSP analyses." Tectonophysics 303(1-4): 51-69.
Lenoir, X., C. J. Garrido, J.-L. Bodinier, J.-M. Dautria and GervillaF. (2001). "The recrystallization front of the Ronda periodite: Evidence for melting and thermal erosion of subcontinental lithospheric mantle beneath the Alboran basin." Journal of Petrology 42(1): 141-158.
Lister, G. S., and Hobbs, B.E., (1980). " The simulation of fabric development during plastic deformation and its application to quartzite." the influence of the deformation history. J. Struct. Geol. 2: 355-370.
Lister, G. S. and B. E. Hobbs (1980). "The simulation of fabric development during plastic deformation and its application to quartzite: the influence of deformation history." J. Struct. Geol. 2(3): 355-370.
Lister, G. S. and M. S. Paterson (1979). "The simulation of fabric development during plastic deformation and its application to quartzite: fabric transitions." J. Struct. Geol. 1(2): 99-115.
Lister, G. S., M. S. Paterson and B. E. Hobbs (1978). "The simulation of fabric development in plastic deformation and its application to quartzite: the model." Tectonophysics 45: 107-158.
Lliboutry, L. A. (1987). " Very Slow Flows of Solids." Basics of Modelling in Geodynamics and Glaciology. Martinus Nijhoff Publishers. Dordrecht 504 pp: 504 pp.
Lusk, M. T. (1999). "A phase-field paradigm for grain growth and recrystallization." Proceedings - Royal Society. Mathematical, Physical and Engineering Sciences 455(1982): 677-700.
Marone, C., Raleigh, C.B. and Scholz, C.H., (1989). Frictional behaviour and constitutive modelling of simulated fault gouge. Submitted to J. Geophys. Res. .
Mecking, H. (1981). " Computer simulation of texture development, in." Proc. 6th. Int. Conf. Textures Materials. The Iron and Steel Institute of Japan Tokyo, pp: 53-66.
Miyake, A. (1996). "Monte Carlo simulation of normal grain growth in two dimensions." Journal of Mineralogy, Petrology and Economic Geology 91(9): 339-351.
Miyake, A. (1998). "Monte Carlo simulation of normal grain growth in 2- and 3-dimensions; the lattice-model independent grain size distribution." Contributions to Mineralogy and Petrology 130(2): 121-133.
Ogilvie, S. R. and P. W. J. Glover (2001). "High resolution petrophysical measurements of deformation bands in sandstones." Physics and Chemistry of the Earth, Part A: Solid Earth and Geodesy 26(1-2): 27-32.
Paritosh, D., Srolovitz, J., Battaile, C. C., Li, X. & Butler, J. E. (1999). "Simulation of faceted film growth in two-dimensions: microstructure, morphology and texture." Acta mater. 47: 2269-2281.
Passchier, C., W and D. Sokoutis (1993). "Experimental modelling of mantle porphyroclasts." Journal of Structural Geology 15 ((7) ): 895-909
Passchier, C. W. (1987). "Efficient use of the velocity gradients tensor in flow modelling." Tectonophysics 136: 159-136.
Passchier, C. W. and D. Sokoutis (1993). "Experimental modelling of mantled porphyroclasts." J. Struct. Geol. 15: in press.
Paterson, M. S. (2001). "Relating experimental and geological rheology." International Journal of Earth Sciences in press.
Paterson, M. S. and D. L. Olgaard (2000). "Rock deformation tests to large shear strains in torsion." Journal of Structural Geology 22(9): 1341-1358.
Pennacchioni, G., L. Fasolo, M. M. Cecchi and L. Salasnich (2000). "Finite-element modelling of simple shear flow in Newtonian and non-Newtonian fluids around a circular rigid particle." Journal of Structural Geology 22(5): 683-692.
Pysklywec, R. N., C. Beaumont and P. Fullsack (2000). "Modeling the behaviour of the continental mantle lithosphere during plate convergence." Geology 28(7): 655-658.
Raabe, D. (1998). Computational Materials Science: The Simulation of Materials Microstructures and Properties. Weinheim, Wiley-VCH.
Raabe, R. B., R. C. (2000). "Coupling of a crystal plasticity finite-element model with a probabilistic cellular automaton for simulating primary static recrystallization in aluminium." Modelling Simul. Mater. Sci. Eng. 8: 445—462.
Radhakrishnan, B., Sarma, G. B. & Zacharia,T. (1998). "Modeling the kinetics and microstructural evolution during static recrystallization- Monte Carlo simulation of recrystallization." Acta mater. 46: 4415-4433.
Ralser, S., Hobbs, B.E. and Ord, A., (1988). " Computer simulation of texture development in polycrystalline aggregates with a single slip system." Prodeedings of Eighth Int. Conf. on Textures of Materials. Santa Fe New Mexico, 20-25, September: New Mexico, 20-25, September.
Riedel, M. R. (1996). "Simulation of nucleation and growth, partial melting, and dynamic recrystallization using a simple computation algorithm
AGU 1996 fall meeting." American Geophysical Union 1996 fall meeting 77(46, Suppl.): 486.
Rosakis, P. and H. Tsai (1994). "On the role of shear instability in he modelling of crystal twining." Mechanics of Materials 17(2-3): 245-259.
Semiatin, S. L. and V. Seetharaman (1995). "Deformation and microstructure development during hot-pack rolling of a near-gamma titanium aluminide alloy." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(2): 371-381.
Shen, G., S. L. Semiatin and R. Shivpuri (1995). "Modeling microstructural development during the forging of Waspaloy." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(7): 1795-1803.
Soares, A., A. C. Ferro and M. A. Fortes (1985). "Computer simulation of grain growth in a bimodal polycrystal." Script. Metall. 19: 1491-1496.
Srolovitz, D. J., M. P. Anderson, G. S. Grest and P. S. Sahni (1984). "Computer simulation of grain growth - III. Influence of particle dispersion." Act. Metall. 32(9): 1429-1438.
Srolovitz, D. J., M. P. Anderson, P. S. Sahni and G. S. Grest (1984). "Computer simulation of grain growth - II. Grain size distribution, topology, and local dynamics." Act. Metall. 32(5): 793-802.
Srolovitz, D. J., G. S. Grest and M. P. Anderson (1985). "Computer simulation of grain growth - V. Abnormal grain growth." Act. Met. 33(12): 2233-2247.
Srolovitz, D. J., G. S. Grest and M. P. Anderson (1986). "Computer simulation of recrystallization - I. Homogeneous nucleation and growth." Act. Metall. 34(9): 1833-1845.
Telley, H., T. M. Liebling and A. Mocellin (1988). Simulation of grain growth in 2-dimensions: influence of the energy expression for the grain boundary network. Annealing Processes - Recovery, Recrystallization and Grain Growth, Risø National Laboratory, Roskilde, Denmark, Risø National Laboratory.
ten Brink, C. E. and C. W. Passchier (1993). "Modelling of mantled porphyroclasts using rock analogue materials." J. Struct. Geol. submitted.
Tóth, L. S., A. Molinari and P. D. Bons (1993). "Self consistent modelling of the creep behavior of mixtures of camphor and octachloropropane." Mat. Sc. Eng. A175(1-2): 231-236.
Treagus, S. H. and D. Sokoutis (1992). "Laboratory modelling of strain variation across rheological boundaries." J. Struct. Geol. 14(4): 405-424.
Valenta, R. K., Oliver, N.H.S., Tan, J. and Jessell, M.W. and (1994). " Analysis and forward modelling of the structural history of the Mt Curly area, Ord River, East Kimberly, W." A. SGTSG Field conference Febuary: Jindabyne NSW.
Van Houtte, P. (1978). " Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning." Acta Metall. 26: 591-604.
Venera, Z., K. Schulmann and A. Kroner (2000). "Intrusion within a transtensional tectonic domain: the Cista granodiorite (Bohemian Massif)--structure and rheological modelling." Journal of Structural Geology 22(10): 1437-1454.
Weaire, D. and J. P. Kermode (1983). "Computer simulation of a two-dimensional soap froth I. Method and motivation." Phil. Mag. B 48(3): 245-259.
Weaire, D. and J. P. Kermode (1984). "Computer simulation of a two-dimensional soap froth II. Analysis of results." Phil. Mag. B 50(3): 379-395.
Weber, J. C., D. A. Ferrill and M. K. Roden-Tice (2001). "Calcite and quartz microstructural geothermometry of low-grade metasedimentary rocks, Northern Range, Trinidad." Journal of Structural Geology 23(1): 93-112.
Weijermars, R. and H. Schmeling (1986). "Scaling of Newtonian and non-Newtonian fluid dynamics without inertia for quantitative modelling of rock flow due to gravity (inclusing the concept of rheologic similarity)." Phys. Earth Planet. Inter. 43: 316-330.
Wejchert, J., D. Weaire and J. P. Kermode (1986). "Monte Carlo simulation of the evolution of a two-dimensional soap froth." Phil. Mag. B 53(1): 15-24.
Wenk, H.-R., Canova, G., Molinari, A. and Kocks, U.F., (1989). "Viscoplastic modelling of texture development in quartzite." Journal of Geophysical Research 94: 17895-17906.
Wenk, H. R. (1999). "A voyage through the deformed Earth with the self-consistent model." Modelling and Simulation in Materials Science and Engineering 7: 699-723.
Wenk, H. R., K. Bennett, G. R. Canova and A. Molinari (1991). "Modelling plastic deformation of peridotite with the self-consistent theory." J. Geoph. Res. 96(B5): 8337-8349.
Wenk, H. R. and C. N. Tome (1999). "Modeling dynamic recrystallization of olivine aggregates deformed in simple shear." Journal of Geophysical Research, B, Solid Earth and Planets 104(11): 25,513-25,527.
Yabushita, S., N. Hatta, S. Kikuchi and J. Kokado (1985). "Simulation of grain growth in the presence of second phase particles." Scr. Metall. 19: 853-857.
Yang, X. and D. R. Gray (1994). "Strain, cleavage and microstructure variations in sandstone: Implications for stiff layer behaviour in chevron folding." Journal of Structural Geology 16(10): 1353-1365.
Zhang, Y., B. E. Hobbs and A. Ord (1994). "Numerical simulation of fabric development in polycrystalline aggregates with one slip system." Journal of Structural Geology 16(9): 1297-1313.
Zhang, Y., Hobbs, B. and Jessell, M. (1991). " Computer simulation of buckling and fabric development in a single elastic-perfectly-plastic layer with one slip system." Mitt. aus den Geol. Inst. ETH Zürich Neue Folge: 239b.
Zhang, Y., Hobbs, B.E. and Jessell, M.W. (1993). " Crystallographic preferred orientation development in a buckled single layer: a computer simulation." Journal of Structural Geology 15: 265-276.
Zhang, Y., M. W. Jessell and B. E. Hobbs (1996). "Experimental and numerical studies of the accommodation of strain incompatibility on the grain scale." Journal of Structural Geology 18(4): 451-460.
Zhang, Y. H., B. E.; Jessell, M. W. and M. e. D. Casey, Dorothee (editor); Ford, Mary (editor); Watkinson, John (editor); Hudleston, Peter J. (editor) (1993). Crystallographic preferred orientation development in a buckled single layer; a computer simulation
The geometry of naturally deformed rocks, Pergamon, Oxford-New York, International. 15: 265-276.