grain size

Armstrong, R. W. and F. J. Zerilli (1994). "Dislocation mechanics aspects of plastic instability and shear banding." Mechanics of Materials 17(2-3): 319-327.

Bartozzi, M., A. P. Boyle and D. J. Prior (2000). "Automated grain boundary detection and classification in orientation contrast images." Journal of Structural Geology 22(11-12): 1569-1579.

Bons, P. D. and J. L. Urai (1992). "Syndeformational grain growth: microstructures and kinetics." Journal of Structural Geology 14(8-9): 1101-1109.

Bos, B., C. J. Peach and C. J. Spiers (2000). "Slip behavior of simulated gouge-bearing faults under conditions favoring pressure solution." Journal of Geophysical Research B: Solid Earth 105(7): 16,699-16,717.

Bruhn, D. F., D. L. Olgaard and L. N. Dell'Angelo (1999). "Evidence for enhanced deformation in two-phase rocks: Experiments on the rheology of calcite-anhydrite aggregates." Journal of Geophysical Research B: Solid Earth 104(1): 707-724.

Busch, J. P. and B. A. Van der Pluijm (1995). "Calcite textures, microstructures and rheological properties of marble mylonites in the Bancroft shear zone, Ontario, Canada." Journal of Structural Geology 17(5): 677-688.

Carsley, J. E., W. W. Milligan, S. A. Hackney and E. C. Aifantis (1995). "Glasslike behavior in a nanostructured Fe/Cu alloy." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(9): 2479-2481.

Chang, H. J., C. H. Tsai and J. J. Kai (1994). "Effects of temperature on the cyclic deformation behaviour and microstructural changes of 12Cr-1MoVW martensitic stainless steel." International Journal of Pressure Vessels and Piping 59(1-3): 31-40.

de Bresser, J. H. P., J. H. ter Heege and C. J. Spiers (2001). "Grain size reduction by dynamic recrystallization: can it result in major rheological weakening?" International Journal of Earth Sciences in press.

de Meer, S. and C. J. Spiers (1995). "Creep of wet gypsum aggregates under hydrostatic loading conditions." Tectonophysics 245(3-4): 171-183.

Derby, B., D. J. e. Barber and P. G. e. Meredith (1990). Dynamic recrystallization and grain size. Deformation processes in minerals, ceramics and rocks. London, United Kingdom: 354-362.

Dresen, G., Z. Wang and Q. Bai (1996). "Kinetics of grain growth in anorthite." Tectonophysics 258(1-4): 251-262.

Eberhardt, E., B. Stimpson and D. Stead (1999). "Effects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures." Rock Mechanics and Rock Engineering 32(2): 81-99.

Edward, G. H., M. A. Etheridge and B. E. Hobbs (1982). "On the stress dependence of subgrain size." Textures and Microstructures 5: 127-152.

Etheridge, M. A. a. V., R.H., (1981). " A Deformed polymictic conglomerateƒƒƒthe influence of grain size and composition on the mechanism and rate of deformation." Tectonophysics 79: 237-254.

Fliervoet, T. F. and S. H. White (1995). "Quartz deformation in a very fine grained quartzo-feldspathic mylonite: a lack of evidence for dominant grain boundary sliding deformation." Journal of Structural Geology 17(8): 1095-1109.

Freeman, B. and C. C. Ferguson (1986?). "Deformation mechanism maps and micromechanics of rocks with distributed grain sizes." J. Geoph. Res.??: manuscript.

Gleason, G. C., V. Bruce and H. W. Green (1999). "Experimental investigation of melt topology in partially molten quartzo-feldspathic aggregates under hydrostatic and non-hydrostatic stress." Journal of Metamorphic Geology 17(6): 705-722.

Heilbronner, R. (1998). "The influence of three-dimensional grain size distributions on the rheology of polyphase rocks." Journal of Structural Geology 20(6): 695-705.

Heilbronner, R. (2000). "Automatic grain boundary detection and grain size analysis using polarization micrographs or orientation images." Journal of Structural Geology 22(7): 969-981.

Hippertt, J., A. Rocha, C. Lana, M. Egydio-Silva and T. Takeshita (2001). "Quartz plastic segregation and ribbon development in high-grade striped gneisses." Journal of Structural Geology 23(1): 67-80.

Ishii, K. (1988). "Grain growth and re-orientation of phyllosilicate minerals during the development of slaty cleavage in the South Kitakami Mountains, Northeast Japan." Journal of Structural Geology 10 ((2) ): 145-154

Jaroslow, G. E., G. Hirth and H. J. B. Dick (1996). "Abyssal peridotite mylonites: implications for grain-size sensitive flow and strain localization in the oceanic lithosphere." Tectonophysics 256(1-4): 17-37.

Jessell, M. W. L., Gordon S. and Anonymous (1989). The relative roles of pure shear and simple shear during crustal deformation

Australasian tectonics, Geological Society of Australia, Sydney, N.S.W., Australia. 24: 77-78.

Kanagawa, K., S. F. Cox and S. Zhang (2000). "Effects of dissolution-precipitation processes on the strength and mechanical behavior of quartz gouge at high-temperature hydrothermal conditions." Journal of Geophysical Research B: Solid Earth 105(5): 11,115-11,126.

Kennedy, L. A. and J. M. Logan (1998). "Microstructures of cataclasites in a limestone-on-shale thrust fault: implications for low-temperature recrystallization of calcite." Tectonophysics 295(1-2): 167-186.

Krabbendam, M. and J. L. Urai (2001). "Grain size stabilisation of by dispersed graphite in a high grade quartz mylonite: an example from Naxos (Greece)." Journal of Structural Geology in press.

Kruse, R. and H. Stunitz (1999). "Deformation mechanisms and phase distribution in mafic high-temperature mylonites from the Jotun Nappe, southern Norway." Tectonophysics 303(1-4): 223-249.

Kuster, M. and B. Stockhert (1999). "High differential stress and sublithostatic pore fluid pressure in the ductile regime -- microstructural evidence for short-term post-seismic creep in the Sesia Zone, Western Alps." Tectonophysics 303(1-4): 263-277.

Last, H. R. and R. K. J. Garrett (1996). "Mechanical behavior and properties of mechanically alloyed aluminum alloys." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(3): 737-745.

Leiss, B. and T. Weiss (2000). "Fabric anisotropy and its influence on physical weathering of different types of Carrara marbles." Journal of Structural Geology 22(11-12): 1737-1745.

Lloyd, G. E. (2000). "Grain boundary contact effects during faulting of quartzite: an SEM/EBSD analysis." Journal of Structural Geology 22(11-12): 1675-1693.

Mauler, A., M. Bystricky, K. Kunze and S. Mackwell (2000). "Microstructures and lattice preferred orientations in experimentally deformed clinopyroxene aggregates." Journal of Structural Geology 22(11-12): 1633-1648.

McDonnell, R. D., C. J. Peach, H. L. M. Van Roermund and C. J. Spiers (2000). "Effect of varying enstatite content on the deformation behavior of fine-grained synthetic peridotite under wet conditions." Journal of Geophysical Research B: Solid Earth 105(6): 13,535-13,553.

Meyers, M. A., U. R. Andrade and A. H. Chokshi (1995). "Effect of grain size on the high-strain, high-strain-rate behavior of copper." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(11): 2881-2893.

Miyake, A. (1998). "Monte Carlo simulation of normal grain growth in 2- and 3-dimensions; the lattice-model independent grain size distribution." Contributions to Mineralogy and Petrology 130(2): 121-133.

Molli, G., P. Conti, G. Giorgetti, M. Meccheri and N. Oesterling (2000). "Microfabric study on the deformational and thermal history of the Alpi Apuane marbles (Carrara marbles), Italy." Journal of Structural Geology 22(11-12): 1809-1825.

Nam, T. N., S. Otoh and T. Masuda (1999). "In-situ annealing experiments of octachloropropane as a rock analogue; kinetics and energetics of grain growth." Tectonophysics 304(1-2): 57-70.

Newman, J., W. M. Lamb, M. R. Drury and R. L. M. Vissers (1999). "Deformation processes in a peridotite shear zone: reaction-softening by an H2O-deficient, continuous net transfer reaction." Tectonophysics 303(1-4): 193-222.

Newman, J. and G. Mitra (1994). "Fluid-influenced deformation and recrystallization of dolomite at low temperatures along a natural fault zone, Mountain City Window, Tennessee." Geological Society of America Bulletin 106(10): 1267-1280.

Post, A. and J. Tullis (1998). "The rate of water penetration in experimentally deformed quartzite: implications for hydrolytic weakening." Tectonophysics 295(1-2): 117-137.

Post, A. and J. Tullis (1999). "A recrystallized grain size piezometer for experimentally deformed feldspar aggregates." Tectonophysics 303(1-4): 159-173.

Rutter, E. H., M. Casey and L. Burlini (1994). "Preferred crystallographic orientation development during the plastic and superplastic flow of calcite rocks." Journal of Structural Geology 16(10): 1431-1446.

Schulmann, K. and B. Mlcoch (1996). "High-temperature microstructures and rheology of deformed granite, Erzgebirge, Bohemian Massif." Journal of Structural Geology 18(6): 719-733.

Shrinivas, V., S. K. Varma and L. E. Murr (1995). "Deformation-induced martensitic characteristics in 304 and 316 stainless steels during room-temperature rolling." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(3): 661-671.

Skrotzki, W., R. Tamm, C.-G. Oertel, J. Roseberg and H.-G. Brokmeier (2000). "Microstructure and texture formation in extruded lead sulfide (galena)." Journal of Structural Geology 22(11-12): 1621-1632.

Srolovitz, D. J., M. P. Anderson, P. S. Sahni and G. S. Grest (1984). "Computer simulation of grain growth - II. Grain size distribution, topology, and local dynamics." Act. Metall. 32(5): 793-802.

Tullis, J. and R. A. Yund (1991). "Diffusion creep in feldspar aggregates: experimental evidence." Journal of Structural Geology 13(9): 987-1000.

van der Pluijm, B., A (1991). "Marble mylonites in the Bancroft shear zone, Ontario, Canada; microstructures and deformation mechanisms." Journal of Structural Geology 13((10)): 1125-1135.

van der Wal, D., P. Chopra, M. Drury and J. FitzGerald (1993). "Relationsship between dynamically recrysytallized grain size and deformation conditions in experimentally deformed olivine rocks." Geophysical Research Letters 20(14): 1479-1482.

Van Roermund, H. L. M., M. R. Drury, A. Barnhoorn and A. A. De Ronde (2000). "Super-silicic garnet microstructures from an orogenic garnet peridotite, evidence for an ultra-deep (>6 GPa) origin." Journal of Metamorphic Geology 18(2): 135-147.

Wang, G.-X., B. Dogan, F.-Y. Hsu, H.-J. Klaar and M. Dahms (1995). "Microstructure and high-temperature tensile deformation of TiAl(Si) alloys made from elemental powders." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 26A(3): 691-701.

Wang, G. Z. and J. H. Chen (1996). "Comparison of fracture behavior of low alloy steel with different sizes of carbide particles." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 27A(7): 1909-1917.

Wang, J. N. (1994). "Effect of grain size distribution on the rheological behavior of polycrystalline materials." Journal of Structural Geology 16(7): 961-970.

Weiss, J. and M. Gay (1998). "Fracturing of ice under compression creep as revealed by a multifractal analysis." Journal of Geophysical Research B: Solid Earth 103(B10): 24,005-24,016.

White, J. C. and L. A. Kennedy (1998). "Intracrystalline plasticity, interface mobility and recrystallization in calcite; the role of ductility in sub-greenschist fault zones." Geological Society of America, 1998 annual meeting 30(7): 325.

Wigum, B. J. (1995). "Examination of microstructural features of Norwegian cataclastic rocks and their use for predicting alkali-reactivity in concrete." Engineering Geology 40(3-4): 195-214.

Wu, M. S. and J. Niu (1995). "Micromechanical prediction of the compressive failure of ice: model development." Mechanics of Materials 20(1): 9-32.

Zeuch, D. H. (1983). "On the inter-relationship between grain size sensitive creep and dynamic recrystallization of olivine." Tectonophysics 93: 151-168.