contact Cover

2.1.1 Variation in fold profile

This sequence shows the affect of varying the fold profile geometry for a 200 m thick layer.

All block diagrams are viewed from SW.
Click on the images to launch Noddy. A legend is provided at the end of this page.

Link	Block	Gravity	Magnetics	Magnetics	Magnetics at Pole	Magnetics at Pole 1VD
Sinusoidal Folds	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE
	This model was generated using a similar fold style, so there is some hinge thickening relative to the limbs.
Chevron Folds	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE
Asymmetric Folds	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE
	The west limbs of this fold are structurally thickened.
Box Folds	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE
	These folds are actually formed as a result of conjugate kink sets, and results in the thickening of the limbs relative to the hinges.
Anticlinoriums & Synclinoriums	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE
Buckle Fold	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE	LOAD JPEG IMAGE
	This fold has uniform limb and hinge thickness, but still shows anomaly peaks at the hinges.

Key	Survey Parameters	Scales
layer k = 10-2 background k = 0 image width 10,000 m	Inclination -50° or -90° Intensity 50,000 or 70,000 gamma Flight height 80 m	max min max min

All models created using Noddy
Copyright © 1998-2002 AGCRC & Mark Jessell

WWW conversion by Ian Brayshaw